Archive

Published: Građevinar 66 (2014) 5
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): PDF

Strength and ductility of concrete confined circular columns

Dušan Najdanović, Branko Milosavljević

Abstract

The design procedure of capacity and ductility on the concrete columns with circular cross section depending on the amount of the confining reinforcement is presented in this paper. The stress-strain model in which the longitudinal compressive strain of the concrete at failure is corresponding to the first fracture of the transverse reinforcement, is presented. The cross section capacity and the ductility factor corresponding to the longitudinal force and stirup distance is analyzed. Use of the similar design procedure on concrete-filled steel tubular columns and in strengthening of columns using still straps or FRP is possible.

Keywords
limit bearing capacity, curvature, ductility, circular columns, transverse reinforcement

HOW TO CITE THIS ARTICLE:

Najdanović, D., Milosavljević, B.: Strength and ductility of concrete confined circular columns, GRAĐEVINAR, 66 (2014) 5, pp. 417-423, doi: https://doi.org/10.14256/JCE.986.2013

OR:

Najdanović, D., Milosavljević, B. (2014). Strength and ductility of concrete confined circular columns, GRAĐEVINAR, 66 (5), 417-423, doi: https://doi.org/10.14256/JCE.986.2013

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
Najdanović WEB
Dušan Najdanović
University of Belgrad
Faculty of Civil Engineering
Milosavljević WEB
Branko Milosavljević
University of Belgrad
Faculty of Civil Engineering