Archive

UDK: 624.072.2:624.013.2
DOI: n/a

Published: Građevinar 58 (2006) 10
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a

Increase in bearing capacity of composite girders by partial steel-section encasement

Damir Markulak, Damir Varevac

Abstract

The studies of increase in the bearing capacity of steel-concrete composite girders, as obtained by partial steel section encasement with concrete in the zone of internal bearings, are described. Continuous girders are considered, and composite action is applied to rolled steel girders and reinforced-concrete monolithic slabs of constant thickness. The results obtained show that a significant increase in the bearing capacity of composite girders can thus be achieved, and that this increase is even more pronounced in case of greater spans, and when HE-A steel sections are used.

Keywords
steel section, encasement concrete, partial encasement, non-linear analysis, composite girder, continuous composite girder

HOW TO CITE THIS ARTICLE:

Markulak, D., Varevac, D.: Increase in bearing capacity of composite girders by partial steel-section encasement, GRAĐEVINAR, 58 (2006) 10

OR:

Markulak, D., Varevac, D. (2006). Increase in bearing capacity of composite girders by partial steel-section encasement, GRAĐEVINAR, 58 (10)
Authors:
Damir Markulak WEB
Damir Markulak
Josip Juraj Strossmayer University of Osijek
Faculty of Civil Engineering and Architecture Osijek
varevac damir WEB
Damir Varevac
University of J. J. Strossmayer in Osijek,
Faculty of Civil Engineering