Archive

UDK: 624.072.2:624.043
DOI: n/a

Published: Građevinar 55 (2003) 4
Paper type: Original scientific paper
Download article (Croatian): PDF
Download article (English): n/a

Bending moment - curvature diagram for reinforced-concrete girders

Tomislav Kišiček, Zorislav Sorić

Abstract

Procedures for calculating bending moment - curvature diagram for rectangular and T-shaped reinforced-concrete girders, with differences in the field and bearing, are described in the paper. The procedure of forming diagram with three typical points, gradual increase in bending moment and gradual increase in curvature, is presented. Differences between these three approaches are indicated. It is emphasized in the final part of the paper that the diagram determined by three typical points is sufficiently accurate for practical use.

Keywords
increase in force, increase in displacement, deflection, reinforced-concrete girder, bending moment - curvature diagram

HOW TO CITE THIS ARTICLE:

Kišiček, T., Sorić, Z.: Bending moment - curvature diagram for reinforced-concrete girders, GRAĐEVINAR, 55 (2003) 4

OR:

Kišiček, T., Sorić, Z. (2003). Bending moment - curvature diagram for reinforced-concrete girders, GRAĐEVINAR, 55 (4)
Authors:
Kiisicek WEB
Tomislav Kišiček
University of Zagreb,
Faculty of Civil Engineering

Zorislav Sorić
University of Zagreb,
Faculty of Civil Engineering