Archive

UDK: 624.5.012.46:624.043
DOI: n/a

Published: Građevinar 61 (2009) 9
Paper type: Original scientific paper
Download article (Croatian): PDF
Download article (English): n/a

Analysis of stress-ribbon bridges

Ivan Kalafatić, Jure Radić, Zlatko Šavor

Abstract

The analysis of stress-ribbon bridges, aiming at attaining the required bridge superstructure geometry under dead weight action, based on the serviceability criteria for footbridges, is presented. The required number of tendons for the construction of the bridge and the number of additional tendons needed for post-tensioning, is optimized. The final result is the choice of the appropriate construction procedure, which defines the required tendon lengths, tendon shapes, and the prestressing force at the anchoring point under the action of their self-weight.

Keywords
prestressing, analysis, required geometry, tendon, stress-ribbon bridge, construction, footbridges

HOW TO CITE THIS ARTICLE:

Kalafatić, I., Radić, J., Šavor, Z.: Analysis of stress-ribbon bridges, GRAĐEVINAR, 61 (2009) 9

OR:

Kalafatić, I., Radić, J., Šavor, Z. (2009). Analysis of stress-ribbon bridges, GRAĐEVINAR, 61 (9)
Authors:

Ivan Kalafatić
University of Zagreb,
Faculty of Civil Engineering
Autor Radić WEB
Jure Radić
University of Zagreb,
Faculty of Civil Engineering
Zlatko Savor WEB
Zlatko Šavor
University of Zagreb,
Faculty of Civil Engineering