Archive

Published: Građevinar 71 (2019) 5
Paper type: Professional paper
Download article (Croatian): PDF
Download article (English): PDF

Adhesion and anticorrosive properties of DTM coating as related to primer coating

Mario Kralj, Krunoslav Pavković, Ivan Stojanović, Josipa Anđal

Abstract

High worldwide prevalence of steel in the construction of buildings and infrastructure is associated with high costs that are due to the sensitivity of steel to corrosion. To reduce the steel structure corrosion protection costs, great efforts are currently made to develop new technologies that would reduce working time and extend service life of corrosion protection systems. Due to an increasing use of the “direct to metal” (DTM) system for corrosion protection of steel structures, this system was tested in the scope of this study and compared with the systems involving the use of primer coating. The tests were carried out on three types of corrosion protection systems.

Keywords
corrosion, coating, adhesion, delamination, steel, DTM , direct to metal

HOW TO CITE THIS ARTICLE:

Kralj, M., Pavković, K., Stojanović, I., Anđal, J.: Adhesion and anticorrosive properties of DTM coating as related to primer coating, GRAĐEVINAR, 71 (2019) 5, pp. 401-408, doi: https://doi.org/10.14256/JCE.2435.2018

OR:

Kralj, M., Pavković, K., Stojanović, I., Anđal, J. (2019). Adhesion and anticorrosive properties of DTM coating as related to primer coating, GRAĐEVINAR, 71 (5), 401-408, doi: https://doi.org/10.14256/JCE.2435.2018

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
Autor 1 WEB
Mario Kralj
KRALJ-ING d.o.o.

Krunoslav Pavković
Polytechnic of Zagreb
Department of Civil Engineering
Autor 3 WEB
Ivan Stojanović
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Autor 4 WEB
Josipa Anđal
Polytechnic of Zagreb
Department of Civil Engineering