Archive

Published: Građevinar 70 (2018) 3
Paper type: Scientific paper-Preliminary report
Download article (Croatian): PDF
Download article (English): PDF

Behaviour of 3D RC frames placed at different angles on shaking table

Fatih Bahadir, Fatih Süleyman Balik

Abstract

Behaviour of RC frames placed at different angles (biaxially) on the shaking table is analysed in the paper. The testing was conducted on four two-storey one-bay 3D RC frames scaled down to 1:6 of the original size, the aim being to analyse defects commonly observed on residential buildings. All specimens had infill walls and similar window openings. The specimens were subjected to sinusoidal dynamic testing. Test results show that different failure modes occurred at all specimens in the X and Y directions.

Keywords
reinforced-concrete frame, shaking table, dynamic testing, failure mode

HOW TO CITE THIS ARTICLE:

Bahadir, F., Balik, F. S.: Behaviour of 3D RC frames placed at different angles on shaking table, GRAĐEVINAR, 70 (2018) 3, pp. 171-186, doi: https://doi.org/10.14256/JCE.1655.2016

OR:

Bahadir, F., Balik, F. S. (2018). Behaviour of 3D RC frames placed at different angles on shaking table, GRAĐEVINAR, 70 (3), 171-186, doi: https://doi.org/10.14256/JCE.1655.2016

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
IMAG3
Fatih Bahadir
Necmettin Erbakan University
Eregli Kemal Akman Vocational School
fsbalik
Fatih Süleyman Balik
Necmettin Erbakan University
Eregli Kemal Akman Vocational School